non resettable fuses smd-spt www.schurter.com/pg0 _ 2 fuses surface mount fuse, 5 x 20 mm, time-lag t, h, 250 vac, au plating ? iec 60127-2 250 vac 300 vdc time-lag t description - directly solderable on printed circuit boards - iec standard fuse - h = high breaking capacity standards - iec 60127-2/5 - ul 248-14 - csa c22.2 no. 248.14 approvals - vde certificate number: 40010881 - ul file number: e41599 applications - primary protection on smd pcb references packaging detail s weblinks pdf-datashee t , html-datashee t , general product informatio n , approval s , ce declaration of conformit y , roh s , china-roh s , e-sho p , schurter-stock-chec k , distributor-stock-chec k , detailed request for produc t technical data rated voltage 250 vac, 300 vdc rated current 1 - 16 a breaking capacity 500 a - 1500 a characteristic time-lag t mounting pcb,smt admissible ambient air temp. -55 c to 125 c climatic category 55/125/21 acc. to iec 60068-1 material: housing ceramic material: terminals gold-plated copper alloy unit weight 1 g storage conditions 0 c to 60 c, max. 70% r.h. product marking , current, dielectric strength, cha - racteristic, breaking capacity soldering methods reflow solderability 245 c / 3 sec acc. to iec 60068-2-58, test td resistance to soldering heat 260 c / 10 sec acc. to iec 60068-2-58, test td resistance to vibration acc. to iec 60068-2-6, test fc moisture resistance test mil-std-202, method 106e (50 cycles in a temp./mister chamber) terminal strength mil-std-202, method 211a deflection of board 1 mm for 1 minute thermal shock mil-std-202, method 107d (200 air-to-air cycles from -55 to +125c) case resistance acc. to eia/is-722, test 4.7 >100 m (between leeds and body) resistance to solvents mil-std-202, method 215a dimensions 20 mm ? 10 ? 5.2 20 +0.1 -0.2 0.5 0.2 5.5 5.5 5 9.5 soldering?pads ?
2 non resettable fuses smd-spt www.schurter.com/pg0 _ 2 fuses pre-arcing time rated current in .5 x in min. 2. x in max. 2.75 x in min. 2.75 x in max. 4.0 x in min. 4.0 x in max. 0.0 x in min. 0.0 x in max. 1? a?-?3.15? a 60?min 30?min 750?ms 80?s 95?ms 5?s 10?ms 150?ms 4? a?-?6.3? a 60?min 30?min 750?ms 80?s 150?ms 5?s 10?ms 150?ms 8? a?-?10? a 30?min 30?min 750?ms 80?s 150?ms 5?s 10?ms 150?ms 12.5? a?-?16? a 15?min 30?min 750?ms 80?s 150?ms 5?s 20?ms 150?ms variants rated cur - rent [a] rated vol - tage [vac] rated vol - tage [vdc] breaking capacity voltage drop .0 in max. [mv] voltage drop .0 in typ. [mv] power dissi - pation .5 i n max. [mw] power dissi - pation .5 i n typ. [mw] melting i2t 0.0 intyp. [a2s] order number 1 250 300 1) 250 180 2500 500 1.1 l l 0001.2704.xx 1.25 250 300 1) 250 150 2500 500 1.86 l l 0001.2705.xx 1.6 250 300 1) 200 130 2500 500 4.35 l l 0001.2706.xx 2 250 300 1) 190 120 2500 600 9.2 l l 0001.2707.xx 2.5 250 300 1) 180 100 2500 600 11.7 l l 0001.2708.xx 3.15 250 300 1) 140 100 4000 800 33.7 l l 0001.2709.xx 4 250 150 2) 100 90 4000 900 62.4 l l 0001.2710.xx 5 250 150 2) 100 90 4000 1200 97.5 l l 0001.2711.xx 6.3 250 150 2) 100 70 4000 1200 171 l l 0001.2712.xx 8 250 150 3) 100 70 4000 1300 268 l l 0001.2713.xx 10 250 150 3) 100 70 4000 2100 400 l l 0001.2714.xx 12.5 250 125 4) - 70 - 3100 563 ? l 0001.2715.xx 16 250 125 4) - 70 - 4000 1272 ? l 0001.2716.xx 1) iec: 1500 a @ 250 vac, p.f. = 0.7 - 0.8 1) ul: 10 ka @ 125 vac, p.f. = 0.7 - 0.8 / 1500 a @ 250 vac, p.f. = 0.7 - 0.8 / 1500 a @ 300 vdc 2) iec: 1500 a @ 250 vac, p.f. = 0.7 - 0.8 2) ul: 10 ka @ 125 vac, p.f. = 0.7 - 0.8 / 1500 a @ 250 vac, p.f. = 0.7 - 0.8 / 1500 a @ 150 vdc 3) iec: 1000 a @ 250 vac 3) ul: 1000 a @ 250 vac / 1500 a @ 150 vdc 4) ul: 500 a @ 125 vac, p.f. = 0.7 - 0.8 / 1000 a @ 125 vac / 500 a @ 250 vac / 1500 a @ 125 vdc packaging unit .xx = .11 plastic bag (100 pcs.) .xx = .22 blister tape 33 cm reel (1000 pcs.)
non resettable fuses smd-spt www.schurter.com/pg0 _ 2 fuses time-current-curves time ?in?seconds 0.00 1 0.01 0. 1 1 10 100 1000 10000 100000 1 10 0.8 a 1 ? 3.15 a 4 ? 10 a _ > 1 2.5 a multiple?of? rated?current?in ? the specifications, descriptions and illustrations indicated in this document are based on current information. all content is subject to modifications and amendments. 16.03.2013
|